SPECIAL PURPOSE MACHINES
RUBBER & PLASTICS TRIMMING MACHINES
We are the manufacturer of the auto and manual oil seal trimming machine. The trimming machine is suitable to cut the circle flash of the plastic & rubber parts. There are many types of the trimming machine the user can choose. If the parts are high-volume-low-mix, the auto trimming machine is the best choice for the end user. If the parts have a very rough and bigger flash, the manual machine is a better choice for the end user.
The adjustment is very easy when changing the parts from one to one size and there are many different models the user can choose suitable for different sizes of the seal.
Dimensions of max. overall dimensions (L-B-H): 570 X 650 X 1240mm
Supply voltage: 440V / 50 Hz ±5%, 1.2 A Max operating pressure: 6 bar
The adjustment is very easy when changing the parts from one to one size and there are many different models the user can choose suitable for different sizes of the seal.
Dimensions of max. overall dimensions (L-B-H): 570 X 650 X 1240mm
Supply voltage: 440V / 50 Hz ±5%, 1.2 A Max operating pressure: 6 bar
LEAK TESTING MACHINE
The machine is a manual loading and unloading machine, designed and built to check Air Leakage in the Oil Seals. It gives a signal for the OK & NG seal.
The amount of Air Leakage that the machine is able to detect is very important for the functionality of the product and if the leakage is higher in the Oil Seal is particularly dangerous for the functionality of the product where it is put to use.
Dimensions (L-B-H): 570 X 750 X 1940 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
The amount of Air Leakage that the machine is able to detect is very important for the functionality of the product and if the leakage is higher in the Oil Seal is particularly dangerous for the functionality of the product where it is put to use.
Dimensions (L-B-H): 570 X 750 X 1940 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
FLOW TESTING MACHINE
The machine is an manual loading and unloading machine, designed and built to check the Air Flow permitted in the Oil Seals and then give signal for OK & NG seal.
The rate of Air Flow that the machine is able to detect is very important for the functionality of the product and if the flow rate is higher in the Oil Seal is particularly dangerous for the functionality of the product where it is fixed.
Dimensions (L-B-H): 570 X 750 X 1940 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
The rate of Air Flow that the machine is able to detect is very important for the functionality of the product and if the flow rate is higher in the Oil Seal is particularly dangerous for the functionality of the product where it is fixed.
Dimensions (L-B-H): 570 X 750 X 1940 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
INLINE SPRING CHECKING MACHINE
The machine is a manual loading manual unloading machine, designed and built to check the presence and correct positioning of the spring in the oil seal and to stack the oil seals for packing.
The incorrect positioning that the machine is able to detect is the case in which the spring is undermined from its seat, particularly dangerous for the functionality of the product because the spring can easily come out of the seal.
Dimensions (L-B-H): 600 X 750 X 1870 mm
Supply voltage: 440V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
Test Method: PCB & Proximity Sensor
The incorrect positioning that the machine is able to detect is the case in which the spring is undermined from its seat, particularly dangerous for the functionality of the product because the spring can easily come out of the seal.
Dimensions (L-B-H): 600 X 750 X 1870 mm
Supply voltage: 440V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Range of seal diameter : 20 To 200 mm
Test Method: PCB & Proximity Sensor
GREASING MACHINE
The machine is a manual loading and unloading machine, designed and built to apply Grease.
The machine should preferably be located in a closed workshop environment in conditions of space and cleanliness suitable for the intended use.
Dimensions (L-B-H): 650 X 750 X 1800 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Discharge of Grease: 0.05 To 6.0 grams
Reservoir Capacity: 3.0 Kg
Range of seal diameter : 20 To 200 mm
The machine should preferably be located in a closed workshop environment in conditions of space and cleanliness suitable for the intended use.
Dimensions (L-B-H): 650 X 750 X 1800 mm
Supply voltage: 220V approx. / 50 Hz ±5%
Current consumption: 0.5 Ampere
Max operating pressure: 6 Bar
Type of fluid used: Lubricated Air
Discharge of Grease: 0.05 To 6.0 grams
Reservoir Capacity: 3.0 Kg
Range of seal diameter : 20 To 200 mm
ROPE CONVEYOR FOR RUBBER EXTRUDER
The machine is a manual loading and unloading machine, designed and built for stacking the Rubber Rope supplied from the Extruder machine.
Immediate Stacking of the Rubber ropes is very important for the storage purpose to avoid any foreign particle or contamination. Hence can be kept in favorable environmental conditions for a longer time before use.
The working range is between a minimum external diameter of about 8 mm and a maximum external diameter of about 16 mm.
The machine should preferably be located in a closed workshop environment in conditions of space and cleanliness suitable for the intended use.
Immediate Stacking of the Rubber ropes is very important for the storage purpose to avoid any foreign particle or contamination. Hence can be kept in favorable environmental conditions for a longer time before use.
The working range is between a minimum external diameter of about 8 mm and a maximum external diameter of about 16 mm.
The machine should preferably be located in a closed workshop environment in conditions of space and cleanliness suitable for the intended use.
CUSTOMIZED PROFILE WELDING MACHINE
The machine is a manual loading and unloading machine, designed and built to perform welding on two mettalic parts and join then at four different points.
The correct positioning of the two parts that the machine is able to achieve is with the help of the five guiding pins located on the aluminum fixture and Toggle Clamp. The case in which the parts are undermined from its seat, particularly dangerous for the functionality of the product because it can easily hamper its fitment in the main assembly.
The correct positioning of the two parts that the machine is able to achieve is with the help of the five guiding pins located on the aluminum fixture and Toggle Clamp. The case in which the parts are undermined from its seat, particularly dangerous for the functionality of the product because it can easily hamper its fitment in the main assembly.